HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

# raidcom add device_grp -device_grp_name DevG2 dev101 -ldev_id 101 -cnt 5
(e) Deleting a device group
# raidcom delete device_grp -device_grp_name DevG3 -ldev_id 200 201 204
# raidcom delete device_grp -device_grp_name DevG3 -ldev_id 200-204
# raidcom delete device_grp -device_grp_name DevG3 -ldev_id 200 -cnt 5
Resource group operation
When you have multiple resource group authorities, use the -resource option to see the resource
group information.
Examples
# raidcom get resource
RS_GROUP RGID stat Lock_owner Lock_host Serial#
meta_resource 0 Unlocked - - 64568
RSG_CLI1 1 Unlocked - - 64568
RSG_CLI2 2 Unlocked - - 64568
# raidcom get port
PORT TYPE ATTR SPD LPID FAB CONN SSW SL Serial# WWN PHY_PORT
CL1-A FIBRE ELUN AUT EF N FCAL N 0 64568 50060e8006fc3800 -
CL1-B FIBRE TAR AUT EF N FCAL N 0 64568 50060e8006fc3801 -
CL1-C FICON TAR - - - - - 0 64568 50060e8006fc3802 -
CL1-D FICON TAR - - - - - 0 64568 50060e8006fc3803 -
# raidcom get port -resource 1
PORT TYPE ATTR SPD LPID FAB CONN SSW SL Serial# WWN PHY_PORT
CL1-B FIBRE TAR AUT EF N FCAL N 0 64568 50060e8006fc3801 -
CL1-C FICON TAR - - - - - 0 64568 50060e8006fc3802 -
# raidcom get port -resource 2
PORT TYPE ATTR SPD LPID FAB CONN SSW SL Serial# WWN PHY_PORT
CL1-A FIBRE ELUN AUT EF N FCAL N 0 64568 50060e8006fc3800 -
CL1-D FICON TAR - - - - - 0 64568 50060e8006fc3803 -
Resource lock operation
When you use the following commands, lock the resource that is allocated to resource groups
before executing the command.
• add
• delete
• modify
• initialize
• check_ext_storage
• disconnect
• set
• reset
• reallocate
• monitor
The following examples show locking resource groups, executing commands, and then unlocking
resource groups.
134 Configuration setting commands