HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

DescriptionOption
DEVICE_FILE PORT SERIAL LDEV CTG H/M/12 SSID R:Group PRODUCT_ID
Volume{cec25efe-d3b8-11d4-aead-00c00d003b1e}\Vol3\Dsk0 CL2-D 62496 256 - - -
- OPEN-3-CVS-CM
If the target device file is set as a protection volume or PIN track volume is occurred by dual
failure of the RAID, the device file name is shown by appending '*'. It is valid when specified
-fp or -fl or
-pin
with "-CLI" option. If the -fp option is specified, the data protection volume is a Database
Validator volume. If the -fl option is specified, the data protection volume is a Data Retention
volume. If the -pin option is specified, shows that the volume is PIN track volume because of
double drive failure and/or especially external connection disk failure.
# ls /dev/rdsk/c57t4* | ./inqraid -CLI -fp
DEVICE_FILE PORT SERIAL LDEV CTG H/M/12 SSID R:Group PRODUCT_ID
c57t4d0* CL1-D 62496 32 - s/P/ss 0004 5:01-03 OPEN-3
c57t4d3* CL1-D 62496 35 - s/P/ss 0004 5:01-03 OPEN-3
c57t4d4 CL1-D 62496 36 - s/P/ss 0004 5:01-01 OPEN-3
c57t4d5 CL1-D 62496 37 - s/P/ss 0004 5:01-02 OPEN-3
This example shows that c57t4d0 and c57t4d3 (marked by *) are set to enable Database
Validator checking (-fp option). The raidvchkset command is used to enable/disable volume
protection.
Shows a LUN on the host view by finding a host group (XP1024/XP128 Disk Array and later).-fg
This option is used to know how much pair is possible to create in the paired volume on the
actual array, and calculates the total Bitmap page for Continuous Access
-CLIB -sort
Synchronous/Continuous Access Journal/Business Copy and the unused Bitmap page by
sorting the specified special file (the standard input or the argument) with Serial#,LDEV# order.
The default is Business Copy. This option is valid within '-sort' option.
Note: An identical LDEV which was sorted in Serial#, LDEV# is excepted from the accumulated
total (LDEVs shared by multiple ports are calculated as one LDEV).
Also, a command device is excepted from the accumulated total.
Example:
# ls /dev/rdsk/* | inqraid -sort -CLIB
DEVICE_FILE PORT SERIAL LDEV SL CL +BS/SS UNUSED PRODUCT_ID
c1t0d0 CL1-E 63516 0 0 0 - - OPEN-9-CM
c1t0d1 CL1-E 63516 12288 0 0 1 30718 OPEN-3
c1t0d2 CL1-E 63516 12403 0 0 4 30718 OPEN-9
c1t0d3 CL1-E 63516 12405 0 0 9 30718 OPEN-E
c1t0d4 CL1-E 63516 12800 0 0 12 30718 OPEN-8
c1t0d5 CL1-E 63516 12801 0 0 18 30718 OPEN-8*2
c1t0d6 CL1-E 63516 13057 0 0 31 30718 OPEN-L
c2t0d6 CL2-E 63516 13057 0 0 31 30718 OPEN-L
SL: Shows the SLPR number of LDEV.
CL: Shows the CLPR number of LDEV.
+BC/SS: Shows the accumulated total of Bitmap for the Business Copy. The increase page
shows necessary Bitmap page capacity as one paired volume of Business Copy.
UNUSED: Shows the unused Bitmap page for Business Copy. One Page is about 64 KB.
Specifies the bitmap page for Continuous Access Synchronous/Continuous Access Journal.
The '-fc' option is used to calculate the bitmap page of cylinder size for Continuous Access
Synchronous.
-fh[c]
Example:
# ls /dev/rdsk/* | inqraid -sort -CLIB -fh
DEVICE_FILE PORT SERIAL LDEV SL CL +CA/CAJ UNUSED PRODUCT_ID
c1t0d0 CL1-E 63516 0 0 0 - - OPEN-9-CM
c1t0d1 CL1-E 63516 12288 0 0 1 11605 OPEN-3
c1t0d2 CL1-E 63516 12403 0 0 3 11605 OPEN-9
c1t0d3 CL1-E 63516 12405 0 0 10 11605 OPEN-E
116 Command tools