HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

pairsplit -x sync C:
WARNING: Only flushed to [\\.\C:] drive due to be opening
[SYNC] C: HarddiskVolume3
Note: Syncd has the following behavior as well:
• If the logical drives designated as the objects of the sync command are not opened to any
applications, then syncd flushes the system buffer to a drive and waits (30 sec) the delayed
(paging) IO for dismount after made the dismount state about the drive. If the logical drives
are opened to applications, the syncd waits (30 sec) after the flush of system buffer.
This avoids a problem that NTFS on PVOL is split on inconsistent state because Windows
2003 delays the IO for dismounting.
Note: If sync has failed, you need to confirm the following conditions:
• The logical and physical drives designated as the objects of the sync command are not opened
to any applications. For example, confirm that Explore is not pointed on the target drive. If
Explore is pointed on the target drive, the target drive is opening.
• The sync command does not ignore the detected error on the NT file system, so sync executes
successfully in normal case (NO ERROR case) only on NT file system. For example, confirm
the target drive has no failure on the system for Event Viewer. In this case, you must reboot
the system or delete the partition and reconfigure the target drive.
mount
The mount subcommand mounts the specified drive to the specified partition on the specified data
drive using the drive letter. When the mount subcommand is executed without an argument, all
currently mounted drives (including directory mounted volumes) are displayed, and logical drive
has been mounting an LDM volume then displays Harddisk#[n] configured an LDM volume.
Syntax
-x mount
-x mount drive: hdisk# [partition#] (for Windows NT)
-x mount drive: Volume#(0-N) (for Windows 2012/2008/2003/2000)
-x mount drive: [\directory] Volume#(0-N) (for Windows 2012/2008/2003/2000)
Arguments
DescriptionArgument
Specifies the logical drive, data drive (number), and partition to be mounted.drive: hdisk#
[partition #]
Specifies the logical drive and LDM volume name and number to be mounted. Volume# must be
specified '\Vol# or \Dms# or \Dmt# or \Dmr# ' as LDM volume for Windows
2012/2008/2003/2000.
drive: [\directory]
Volume#
To mount HarddiskVolumeX: -x mount C: hdX or -x mount C: \VolX
For information on '\Vol# or \Dms# or \Dmt# or \Dmr#' for LDM volumes, see Volume Discovery
Function in the P9000 RAID Manager User Guide.
[\directory]: Specifies the directory mount point on the logical drive.
pairsplit -x mount D:\hd1 \Vol8 D:\hd1 <+> HarddiskVolume8 pairsplit -x mount D:\hd2 \Vol9
D:\hd2 <+> HarddiskVolume9
110 Subcommands