HP XP P9000 RAID Manager Reference Guide (T1610-96061, January 2014)

drivescan
The drivescan subcommand displays the relationship between the disk numbers assigned by the
Windows system and the LDEVs on the RAID storage system, and also displays attribute and status
information for each LDEV.
Syntax
-x drivescan drive#(0-N)
Argument
drive#(0-N): Specifies the range of data drive numbers on the Windows system.
Example
The following shows an example of the drivescan subcommand used as an option of the raidscan
command and its output. This example displays the devices for the range of disk drive numbers
from 0 to 20.
raidscan -x drivescan harddisk0,20
Harddisk 0..Port[1] PhId[0] TId[0] Lun[0] [HITACHI] [DK328H-43WS]
Harddisk 1..Port[2] PhId[4] TId[29] Lun[0] [HITACHI] [OPEN-3]
Port[CL1-J] Ser#[ 30053] LDEV#[ 9(0x009)]
HORC=P-VOL HOMRCF[MU#0 = SMPL MU#1 = SMPL MU#2 = SMPL]
RAID5[Group 2- 1] SSID = 0x0008 CTGID = 3
Harddisk 2..Port[ 2] PhId[ 4] TId[29] Lun[ 1] [HITACHI] [OPEN-3]
Port[CL1-J] Ser#[ 30053] LDEV#[ 10(0x00A)]
HORC=S-VOL HOMRCF[MU#0 = SMPL MU#1 = SMPL MU#2 = SMPL]
RAID5[Group 2- 1] SSID = 0x0004 CTGID = 3
Harddisk 3..Port[2] PhId[4] TId[29] Lun[ 6] [HITACHI] [OPEN-3-CM]
Port[CL1-J] Ser#[ 30053] LDEV#[ 15(0x00F)]
Output of the drivescan subcommand:
Harddisk #: Shows the data drive recognized by the Windows system.
Port: Shows the port number on the device adapter recognized by the Windows system.
Phid: Shows the bus number on the device adapter port recognized by Windows system.
Tid: Shows the target ID of the hard disk(s) connected to device adaptor port. For the detail of
fibre-to-SCSI address conversion, see RAID Manager Hitachi Command Control Interface Installation
and Configuration Guide.
LUN: Shows the LU number of the hard disk connected to device adaptor port.
Port[CLX-Y]: Shows the port number on the storage system.
Ser#: Shows the production number (serial number) of the storage system.
LDEV#: Shows the LDEV ID (hexadecimal) of the specified volume.
HORC: Shows the Continuous Access Synchronous attribute (P-VOL, S-VOL, SMPL) of the specified
volume.
HOMRCF: Shows the Business Copy/Snapshot attribute (P-VOL, S-VOL, or SMPL) and MU number
(0-2) of the specified volume.
RAIDX[Group]: Shows the physical location (frame number-parity group number) of the specified
volume and the RAID level of this parity group.
SSID: Shows the SSID of the specified volume.
Note: SSID is the parameter for enterprise storage systems.
CTGID (Continuous Access Synchronous Async/Continuous Access Journal only): Shows the
consistency group ID of specified volume.
Windows subcommands 107