HP XP P9000 for Business Continuity Manager Software Reference Guide

Figure 50 Sort the Copy Group Pairs List Panel
In the Sort the Copy Group Pairs List panel, you can select the sorting order from the following
items.
DescriptionItem
The order of P-VOL device numbers.1. Primary Device Number
The order of primary volume serial numbers.2. Primary Volume Serial Number
The order of S-VOL device numbers.3. Secondary Device Number
The order of the comparison results of the P-VOL and
SVOL capacities.
4. Cylinder
The CYL value is in the following order: P, S, N/A, and
an empty string.
For details about CYL, see “Copy Group Pair Detail
Panel” (page 81).
Scan Copy Pair Inside Storage System Panel
When SCANPAIR is entered on the command line and the Enter key is pressed on the Copy Group
Selection List panel, the display switches to the Scan Copy Pair Inside Storage System panel for
scanning the P-VOL of the PPRC copy pair and generating a copy group definition file. Execute
the YKH2B command to create a copy group definition file for a CA copy group with the HyperSwap
attribute from a PPRC copy pair for which HyperSwaps are enabled. For details about the YKH2B
command, see “YKH2B Command” (page 210).
Figure 51 (page 89) shows the Scan Copy Pair Inside Storage System panel.
Figure 51 Scan Copy Pair Inside Storage System Panel
Table 57 (page 90) describes the items in the Scan Copy Pair Inside Storage System panel.
Discover/Define Configuration panel (configuration file definition) 89