HP XP P9000 for Business Continuity Manager Software Reference Guide

Storage System Selection List panel
In the Add Route Entry or Edit Route Entry panel, if you specify 1 in the selection field and then
press the Enter key, the Storage System Selection List panel appears.
The serial numbers and Device Address Domain IDs of storage systems appear in the Storage
System Selection List panel.
Figure 18 (page 53) shows the Storage System Selection List panel.
Figure 18 Storage System Selection List Panel
Table 33 (page 53) lists and describes the items in the Storage System Selection List panel.
Table 33 Contents of the Storage System Selection List panel
DescriptionItem
Route list ID selected in the Route Config panel.Route List ID
DAD ID specified in the Add Route Entry panel or the Edit Route Entry panel.DADID
A blank appears if no DAD ID has been specified.
Serial number specified in the Add Route Entry panel or the Edit Route Entry panel.SN
A blank appears if no serial number has been specified.
Specify an action.
• s: Selects the DAD ID and serial number of the storage system.
AC
Selectable storage system serial numbers.SN
Selectable DAD IDs.DADID
In the initial state, the entries are displayed in ascending order of EBCDIC codes, with SN followed
by DADID as the priority order.
Edit Route Entry panel
If e is specified for AC in the Route List Information panel, the Edit Route Entry panel, in which you
can update the information about the storage systems defined in the route, appears.
Figure 19 (page 54) shows the Edit Route Entry panel.
Discover/Define Configuration panel (configuration file definition) 53