HP XP P9000 for Business Continuity Manager Software Reference Guide

Table 30 Contents of the Add Attribute panel
DescriptionItem
Specify a route label for the command device line by using no more than 8 alphanumeric
characters. The specification of the route label is optional.
Label
Specify an APID for the command device. Use a 4-digit hexadecimal number (0000 to
FFFF). The specified value must be unique in the storage system.
APID
Edit Attribute panel
If e is specified for the leftmost AC in the Command Device Information panel, then the Edit Attribute
panel, in which you can change the route label of the specified command device line and the APID
of the command device, appears.
Figure 16 (page 51)shows the Edit Attribute panel.
Figure 16 Edit Attribute Panel
Table 31 (page 51) describes the items in the Edit Attribute panel.
Table 31 Contents of the Edit Attribute panel
DescriptionItem
Specify a new route label for the command device line by using no more than 8
alphanumeric characters. The specification of the route label is optional. By default, the
assigned route label appears.
Label
Specify a new APID for the command device. Use a 4-digit hexadecimal number (0000 to
FFFF). The specified value must be unique in the storage system. By default, the assigned
APID appears.
APID
Add Route Entry panel
In the Route List Information panel, pressing the F5 key or specifying i for AC displays the Add
Route Entry panel in which you can add a storage system.
Figure 17 (page 52) shows the Add Route Entry panel.
Discover/Define Configuration panel (configuration file definition) 51