HP XP P9000 for Business Continuity Manager Software Reference Guide

When editing the route list definition (APID update, route deletion, or command device definition),
the Confirm Route List Edit panel prompts you to confirm the update. For more information on the
Confirm Route List Edit panel, see “Confirm Route List Edit Panel” (page 175).
If you change the route list definition, and then press F3=Exit to update the route list, the Confirm
Configuration File Update panel is displayed. For information on the Confirm Configuration File
Update panel, see “Confirm Configuration File Update Panel” (page 172).
Route List Information panel
If s is specified for AC in the Route Config panel, the Route List Information panel is displayed.
The list of storage systems included in the route defined in the selected route list is displayed in the
Route List Information panel.
The Route List Information panel is shown in Figure 8 (page 44).
Figure 8 Route List Information Panel Page 1
If there are multiple routes with the same first storage system, = appears for the first storage system
of the second and subsequent routes.
If the list of storage systems continues beyond the displayable area, > is displayed to the right of
the header. Pressing the F11 key displays the storage systems that could not be displayed.
Figure 9 (page 45) shows the Route List Information panel that appears when the F11 key is pressed.
< appears to the left of the header. Pressing the F10 key returns to the previous screen.
44 ISPF panels