HP XP P9000 for Business Continuity Manager Software Reference Guide

Table 18 Contents of the CCA Selection List for Edit devn panel (continued)

DescriptionItem

Dummy device number assigned from the Edit Device Number for CU panel.Dummy Devn

The value displayed in this column can be modified.

Serial numbers of the storage systems to which devices with conflicting device

numbers belong

S/NConflict Devices

The numbers of the CUs to which devices with conflicting device numbers

belong

CCA of devices with conflicting device numbersCCA

The two leftmost characters indicate the CCA of the device in hexadecimal.

The rightmost character indicates, whether the CCA is an external volume.

The values are:

• +: An external volume

• -: Not an external volume

• (blank): The volume attribute is unknown because it was not requested.

When F3=Exit is pressed to exit this panel, the system checks for any device number conflicts. If

a device number conflict is detected, information about the conflicting volumes is displayed in the

Conflict Devices column for the corresponding volumes. If multiple duplicated device numbers are

detected, the line that is the smallest CCA is displayed at the head of the panel. Until the conflict

is resolved, this panel cannot be closed. If the entered dummy device number is incorrect (not a

hexadecimal string or fewer than 4 digits), you cannot press F3=Exit to finish setup, F7=Backward

(or F8=Forward) to scroll the screen, or F17=DispConf to display the settings until the error is

removed.

If you modify a dummy device number, and then press F3=Exit to close the CU Selection List for

Remote Storage Array panel, the Confirm Configuration File Update panel (see “Confirm

Configuration File Update Panel” (page 172)) prompts you to confirm whether to apply the values.

Edit Device Number for CU Panel

If e is specified in the AC column in the CU Selection List for Edit devn panel, the Edit Device

Number for CU panel for assigning the first dummy device number is displayed.

The following figure shows the Edit Device Number for CU panel.

Edit Device Number for CU

Command ===>

Storage System S/N : 14001 CU : 00 SSID : 2350

Start of Device Number . .

F1=Help F12=Cancel

Table 19 (page 38) describes the items in the Edit Device Number for CU panel.

Table 19 Contents of the Edit Device Number for CU panel

DescriptionItem

Serial number of the storage system to which the CU belongsStorage System S/N

Control unit numberCU

SSID of the CUSSID

Specify the first dummy device number assigned to the CUStart of Device Number

38 ISPF panels