HP XP P9000 for Business Continuity Manager Software Reference Guide

Copy Group Parameters
Format
CGID=copy-group-ID
CGPREFIX=prefix
CGDAD=DADID
[CGROUTE=route-list-ID[,{route-label|'*'}]]]
[CGMONSTAT={ACTIVE|INACTIVE}]
[CGSTARTUPSTATUS=startup-status,startup-action[,NOCANCEL]]
Information to be set
You can specify the startup status of a copy group that you want to monitor, and the startup action
to be executed if the copy group is not in startup status.
“Values That Can Be Specified in the Startup Status and Startup Action Parameters” (page 368) lists
the values that can be specified for the startup status and startup action.
Table 162 Values That Can Be Specified in the Startup Status and Startup Action Parameters
ValueItem
SIMPLEXStartup status
DUPLEX
SUSPOP
HOLD
EXITStartup action
STOP
ADJUST
Parameters
CGID=copy-group-ID
Specifies the copy group name.
CGPREFIX=prefix
Specifies the prefix of the copy group definition file for the copy group.
CGDAD=DADID
Specifies the host device address domain ID of the copy group.
CGROUTE= route-list-ID[,{route-label|'*'}]
Specifies the route list ID to be used during monitoring.
If this parameter is omitted, no route list is used during monitoring.
If a route label is specified, the command device with the specified route label is used.
If * is specified, all command devices are used regardless of whether they have the route label.
If both the route label and * are omitted, command devices with no route label are used.
CGMONSTAT={ACTIVE|INACTIVE}
Specifies the monitoring status of the copy group (whether to monitor the copy group).
ACTIVE
Monitors the copy group.
If you specify ACTIVE for more than one copy group, the first copy group that is specified will be
monitored. When the status of this copy group changes to INACTIVE while BCM Monitor is
running, the next copy group for which ACTIVE is specified is placed in the monitoring status.
368 BCM Monitor Parameter Files