HP XP P9000 for Business Continuity Manager Software Reference Guide

Length (characters)Data type
1
Value to be specifiedItem name
1DecimalEXCTG ID in the forward
direction
3
FEXCTG
Specify in the range from 0
to 3.
1– –S
3, 4
FSpDKC
1 – 5HexadecimalArbitration command device
of the secondary site
3
FarbCDEV
1DecimalEXCTG ID in the reverse
direction
5
REXCTG
Specify in the range from 0
to 3.
1– –S
5, 6
RSpDKC
1 – 4HexadecimalArbitration command device
of the primary site
5
RarbCDEV
1
For details about data types, see the table of syntax elements in “ Copy Types and Targets for Which Commands Can
Be Executed” (page 178).
2
This item is mandatory.
3
This item is mandatory for operation in the forward direction.
4
Indicates that the storage system specified in SSN is to be specified as the supervisor storage system of the secondary
site.
5
This item is mandatory for operation in the reverse direction.
6
Indicates that the DKC specified in PSN is to be specified as the supervisor DKC of the primary site.
NOTE:
• You must specify either the supervisor DKC or the arbitration command device on the first line.
They cannot both be specified on the same line.
• Make sure that only one copy direction (forward direction only, reverse direction only, or
forward and reverse directions) is used in the EXCTG information CSV file.
Specification format for a CTG information CSV file
Specify a CTG information CSV file in the following format:
PSN,SSN,CTID,SubCTID,PATHID
For each item, specify the following values.
Length (characters)
Data type
1
Value to be specifiedItem name
1–5Alphanumeric charactersSerial number of the primary
site storage system (required)
PSN
1–5Alphanumeric charactersSerial number of the
secondary site storage
system (required)
SSN
1–2Hexadecimal numberConsistency group ID
(required)
CTID
1–2Hexadecimal numberSub consistency group ID
(required)
SubCTID
1–2Hexadecimal numberPath group ID (required)PATHID
360 Data Objects