HP XP P9000 for Business Continuity Manager Software Reference Guide

F1=Help F3=Exit F7=Backward F8=Forward F12=Cancel
Table 17 (page 36) describes the items in the CU Selection List for Remote Storage System panel.
Table 17 Contents of the CU Selection List for Edit devn panel
DescriptionItem
DAD ID to which the CU belongsDevice Address Domain
Description of the storage system to which the CU belongsDescription
Serial number of the storage system to which the CU belongsStorage System S/N
Model of the storage system to which the CU belongsModel
Microcode information for the storage system to which the CU belongsuCode
Interface version of the storage system to which the CU belongsIFType
Setting for use of the copy type by the storage system:CASoftware Keys
• Y— Copy type can be used.
CAA
• N— Copy type cannot be used.
BC
CAJ
Specify an action:AC
• s— Displays the CCA Selection List for Edit devn panel used to display
detailed information for the CU.
• e— Displays the Edit Device Number for CU panel used to assign a dummy
device number to the CU.
Control unit numberCU
SSID of the CUSSID
Dummy device number assigned to the start device (the device with the lowest
CCA) in the CU
Dummy Devn
When the control unit does not have a dummy device number assigned to it,
NOTSET is displayed.
Information
If any of the volumes detected in a remote scan or NG scan has not been assigned a dummy
device number (that is, if NOTSET is displayed under Information for any volume), the CU Selection
List for Edit devn panel cannot be closed. In such cases, pressing F3=Exit generates an error
message.
If a command device is not contained within the scanned range specified in the Scan Remote
Device Address Extent panel, the dummy device numbers are not assigned to the command devices,
and the CU Selection List for Edit devn panel displayed after the scan does not display the command
devices. Because of this, if you exit the CU Selection List for Edit devn panel by pressing the
F3=Exitkey, and enter e in AC in the Discover HP Storage System panel. NOTSET is displayed in
Information for the CU number to which the command device belongs. Assign a dummy device
number to the command device.
If the Scan Device Address Extent panel transitions to the CU Selection List for Edit devn panel,
you can return to the Scan Device Address Extent panel by pressing the F3=Exit key in the CU
Selection List for Edit devn panel.
If the Scan Remote Device Address Extent panel or the Discover HP Storage System panel transitions
to the CU Selection List for Edit devn panel, you can return to the Discover HP Storage System
panel by pressing the F3=Exit key in the Selection List for Edit devn panel.
36 ISPF panels