HP XP P9000 for Business Continuity Manager Software Reference Guide

CSV files generated by the YKEXPORT command
• If an item has no value, an equal number of space characters are inserted.
• A header line is always inserted.
• All character strings are in uppercase letters.
Specification Format for a Pair Information CSV File
Specify a pair-information CSV file in the following format:
PDEVN,PSN,PCU,PCCA,SDEVN,SSN,SCU,SCCA,CTID,SubCTID,Number-Of-Pairs
For each item, specify the following values:
Length (characters)Data type
1
Value to be specifiedItem name
1 - 4HexadecimalDevice number of the
primary site
2
PDEVN
1 - 5AlphanumericStorage system serial
number of the primary site
2
PSN
1 - 2HexadecimalCU number of the primary
site
2
PCU
1 - 2HexadecimalCCA number of the primary
site
2
PCCA
1 - 4HexadecimalDevice number of the
secondary site
2
SDEVN
1 - 5AlphanumericStorage system serial
number of the secondary
site
2
SSN
1 - 2HexadecimalCU number of the secondary
site
2
SCU
1 - 2HexadecimalCCA number of the
secondary site
2
SCCA
1 - 2Hexadecimal for other than
CAJ:
Consistency group IDCTID
Specify in the range from 00
to 7F
For CAJ:
Specify in the range from 00
to FF.
1 - 2HexadecimalSubconsistency group IDSubCTID
Specify in the range from 00
to FF.
1 - 5DecimalNumber of times the
specified copy pair is to be
repeated
3
Number-Of-Pairs
Specify in the range from 1
to 99,999.
1
For details about data types, see the table of syntax elements in “ Copy Types and Targets for Which Commands Can
Be Executed” (page 178).
2
Use either of the following methods to specify P-VOL and S-VOL volumes:
• Device number
• Storage system serial number, CU number, and CCA number
358 Data Objects