HP XP P9000 for Business Continuity Manager Software Reference Guide
Table 147 Host-Discovered Array Structure (continued)
DescriptionREXX variables
Volume capacity (the number of cylinders)Cyls
4
External volume informationExternal
5
• Y: External volume
• N: Not an external volume
1
When Business Continuity Manager scans a device that exists in any of the following models, a value of 0 is set:
• HP XP12000/XP10000 Disk Array
• HP XP24000/XP20000 Disk Array
• HP XP P9500 Disk Array
A value of 0 is also set when the YKLOAD command is executed.
2
Created for each CU, thus the device information is created for each defined CU (CU number). The xx in CUxx is a CU
number (hexadecimal value).
Example of CUxx:
If C400 is set to SSID of CU=05, the value for CU05.SSID is C400.
3
Created for each CCA, thus the device information is created for each defined CCA (CCA number). The xx in CCAxx is
a CCA (hexadecimal value).
Example of CCAxx:
If STRG01 is set to the volume serial number of CCA=FF within CU=05, the value for CU05.CCAFF.Volser is STRG01.
4
When Business Continuity Manager performs a remote scan or an NG scan, information cannot be obtained for the
following models:
• XP1024/XP128 Disk Array
• XP12000/XP10000 Disk Array
• XP24000/XP20000 Disk Array
5
External volume information can be obtained when Business Continuity Manager scans a device that exists in any of the
following storage system models. If information cannot be obtained, the value is null.
• HP XP12000/XP10000 Disk Array
• HP XP24000/XP20000 Disk Array
• XP 9500
Route List Structure
Table 148 (page 336) shows the route list structure. The prefix for the name of the route list structure
is HCC.ROUTELIST.dad-id.
NOTE: You can use the YKDROP command to invalidate all the REXX variables in any route list
structure that was loaded by using the YKLOAD command.
Each REXX variable is preceded by a period (.).
Table 148 Route List Structure
DescriptionREXX variables
Route list IDID
Multiaccess (Whether multiple command device lines have been
loaded for one route)
MultiAccessEnable
• 1: Enabled (Multiple command device lines have been loaded)
• 0: Disabled (One command device line has been loaded)
APIDAPID
1
336 Data Objects