HP XP P9000 for Business Continuity Manager Software Reference Guide

USPV
Specify this option when the model of the secondary storage system for the inter-DKC logical path
you want to obtain is HP XP24000/XP20000 Disk Array.
VSP
Specify this option when the model of the secondary storage system for the inter-disk controller
logical path you want to obtain is XP P9500.
Return Codes
Table 122 (page 229) lists the return codes to be returned when the YKQRYDEV command terminates.
Table 122 YKQRYDEV Command Return Code List
MeaningReturn Code
The command terminated abnormally, possibly because the user SVC routine has
not been included properly.
-4095 to -4040
The module cannot be loaded. Possible causes are as follows:-3
• The library dataset has not been linked.
• The module is protected by the RACF program control function.
An interruption occurred during execution.-1
The command completed normally.0
32
• I/O errors were encountered.
• A change in an I/O configuration definition was detected.
An error occurred while a REXX variable was being written.40
Terminating due to processing errors.44
Terminating due to invalid parameters.48
The command terminated abnormally. The user does not have permission to execute
this command.
128
YKQRYPTH Command
Applies to PTH.
Format
YKQRYPTH
1
STEM(stem-name-1)
1
MSG(stem-name-2)
[
1
PSN(storage system-serial-number)[
1
PCU(cu-number)]
[
1
SSN(storage system-serial-number)[
1
SCU(cu-number)]
[
1
PTID(path-group-ID)]
[
1
{FORWARD|REVERSE}]
[
1
RESTRUCT]
[
1
TYPE({CU|DKC})]
Function
This command is a TSO/E command called from REXX scripts.
This command acquires the status of all physical paths allocated to all or some of the logical paths
identified in the path set that is stored in the path set structure with the prefix specified by the STEM
parameter.
Command details 229