HP XP P9000 for Business Continuity Manager Software Reference Guide

Format

YKFCSTAT

STEM(stem-name-1)

MSG(stem-name-2)

DEVN(device-number)

Function

This is a TSO/E command called from REXX scripts.

This command acquires the FlashCopy information related to the specified volume from the storage

system, and stores the information into the FlashCopy information structure that was specified by

the STEM parameter.

If the specified volume is not found, or an I/O error occurred and the storage system information

cannot be acquired, this command creates an error message in the command return configuration

structure, and then returns a return code other than 0.

This command can be used for volumes of the following models on which FlashCopy Mirror Version

2 is installed:

• HP XP12000/XP10000 Disk Array

• HP XP24000/XP20000 Disk Array

• HP XP P9500 Disk Array

Parameters

STEM(stem-name-1) ~ <REXX prefix of 64 or fewer characters>

Specify an optional prefix for the name of the FlashCopy information structure used to store the

FlashCopy information. You must also include a trailing period character.

MSG(stem-name-2) ~ <REXX prefix of 64 or fewer characters>

Specify an optional prefix for the name of the message structure used to store the messages to be

generated by this command. You must also include a trailing period character.

The message structure is initialized when the CLI command with the same name as the MSG

parameter is called.

DEVN(device-number) ~ <4-digit hexadecimal number>

Specify a device number for the volume from which the FlashCopy information will be acquired.

Usually, you specify the P-VOL of Continuous Access Synchronous for Mainframe, continuous

Access Asynchronous for Mainframe, or continuous Access Journal for Mainframe, which is the

target volume of FlashCopy.

This parameter can be specified for locally connected devices only. It cannot be specified for Non

Gen'ed volumes.

Return Codes

Table 111 (page 209) lists the return codes to be returned when the YKFCSTAT command terminates.

208 CLI Commands