HP XP P9000 for Business Continuity Manager Software Reference Guide

PCU(cu-number) ~ <2-digit hexadecimal number>
If this parameter is specified, out of the logical paths within the path set stored in the path set
structure specified for the STEM parameter, inter-CU logical paths will be deleted in all cases where
the CU number of the MCU matches the value specified for this parameter. Inter-DKC logical paths
are not affected by this parameter.
If neither this parameter nor any other parameters are specified, the command establishes all
nonshared inter-CU logical paths.
SSN(storage system-serial-number) ~ <from 5 to 12 alphanumeric characters>
If this parameter is specified, out of the logical paths within the path set stored in the path set
structure specified for the STEM parameter, inter-CU logical paths will be deleted in all cases where
the paths treat CUs within storage systems (that have the serial number specified by this parameter)
as RCUs, and inter-disk controller logical paths will be deleted in all cases where the paths treat
the storage system (that has the serial number specified by this parameter) as the secondary storage
system.
If this parameter is not specified, the command deletes all logical paths with nonshared attributes
unless another parameter is specified.
SCU(cu-number) ~ <2-digit hexadecimal number>
If this parameter is specified, out of the logical paths within the path set stored in the path set
structure specified for the STEM parameter, inter-CU logical paths will be deleted in all cases where
the CU number of the RCU matches the value specified for this parameter. Inter-DKC logical paths
are not affected by this parameter.
If this parameter is not specified, the command deletes all inter-CU logical paths with nonshared
attributes unless another parameter is specified.
PTID(path-group-ID)~<2–digit hexadecimal number>
If this parameter is specified, for each logical path within the path set stored in the path set structure
specified for the STEM parameter, inter-disk controller logical paths that have the path group ID
specified for this parameter are deleted.
If neither this parameter nor any other parameters are specified, the command deletes all non-shared
logical paths.
{FORWARD|REVERSE}
Specify the direction in which the logical path is to be deleted.
If neither is specified, the command will delete a bidirectional logical path.
FORWARD
The command deletes logical paths that are identified in the path set stored in the path set structure
specified by the STEM parameter, each of which is the forward logical path from the initiator node
defined by stem-name-specified-in-STEM-parameterPATH.n.Pri to the target node defined by
stem-name-specified-in-STEM-parameterPATH.n.Sec.
REVERSE
The command deletes logical paths that are identified in the path set stored in the path set structure
specified by the STEM parameter. Each path is a reverse logical path from the initiator node defined
by stem-name-specified-in-STEM-parameterPATH.n.Sec to the target node defined by
stem-name-specified-in-STEM-parameterPATH.n.Pri.
Command details 195