HP XP P9000 for Business Continuity Manager Software Reference Guide

The following figure shows the Confirm Configuration File Delete panel.
Confirm Configuration File Delete
Command ===> ___________________________________________________________
You have requested the deletion of the following file:
BCM.GRP.SI
Are you sure you want to delete the file?
_ Yes, delete the file
Instructions:
Press ENTER key to delete the file.
Press CANCEL to cancel this operation.
F1=Help F12=Cancel
Specifying / for Yes, delete the file and then pressing the Enter key deletes the configuration file.
Pressing the F12=Cancel key cancels the deletion of the configuration file.
Confirm Configuration File Update Panel
When you attempt to update a configuration file for the following operations, the Confirm
Configuration File Delete panel is displayed asking you whether you want to perform the update:
• When changing the copy group definition.
• When changing a dummy device number in the disk configuration definition.
• When changing the route list definition.
• When changing the path set definition.
Figure 95 (page 172) shows an example of the Confirm Configuration File Update panel. The
contents displayed in the panel vary depending on the definition to be changed.
Figure 95 Confirm Configuration File Update Panel
If you change the definition in the Copy Group Attributes panel and then press the Enter key, any
required attributes that were not entered in the Copy Group Attributes panel are displayed in a
Warning. When all required attributes have been specified, the Warning is not displayed.
If you have updated the copy group definition file, the disk configuration definition file, the route
list definition file, or the path set definition file, pressing the Enter key updates the file, and pressing
the F12=Cancel key displays the previous panel.
172 ISPF panels