HP XP P9000 for Business Continuity Manager Software Reference Guide

YKZ257E DASD device 733F(FF21) management error. (Message type: 0F Reason
code: E3 Error code: 6A13 BF42, cmd=3, pos=HCIOE022)
32 1,2
YKZ257E DASD device 733F(FF21) management error. (Message type: 0F Reason
code: E3 Error code: 6A13 BF42, cmd=3, pos=HCIOE022)
32 1,1
***************************** Bottom of data ******************************
F1=Help F5=ErrCode F7=Backward F8=Forward F12=Cancel
Table 4 (page 17) describes the items in the Exception Message panel.
Table 4 Contents of the Exception Message Panel
DescriptionItem
Message ID and message text output to the Text in the message structureMessage
Severity output to the Severity in the message structureSev
Additional information output to the Value in the message structureRelated Information
Pressing the Enter key will cause the displayed Exception Message Panel to close. If there are
multiple messages, they can all be viewed by scrolling the panel. Each operation and the messages
output for that operation are stored in the ISPF log. In a single message, a maximum of two lines
are displayed, and the third line and those lines that follow it, if any, not displayed. The third line
and those below it are checked by using the ISPF log.
If you place the cursor on an error code that is within the displayed message, and then press the
F5=ErrCode key or execute the ERRCODE command, details for that error code are displayed in
the Error Code Help panel. For details on the Error Code Help panel, see “Error Code Help panel”
(page 18). If an error code is split it and spans two rows, details for the error code cannot be
displayed, even if you place the cursor on the error code.
In the following example, details for the error code 6A13 are displayed in the Error Code Help
panel.
When the cursor is placed on the error code:
YKZ257E DASD device 733F(FF21) management error. (Message type: 0F Reason
code: E3 Error code: 6A13 BF42, cmd=3, pos=HCIOE022)
If the cursor is located on a space and you then press the F5=ErrCode key or execute the ERRCODE
command, the first 40 characters before the current cursor position will be searched. the next action
depends on the results of this search:
• If an error code is present, the details for that error code are displayed in the Error Code Help
panel.
• If no error code is present, the first 40 characters that follow the cursor are searched.
• If there is no error code either before or after the cursor, no error code details are displayed.
In the following example, the details for the error code 6A13 are displayed in the Error Code Help
panel.
When the cursor is located on a space:
YKZ257E DASD device 733F(FF21) management error. (Message type: 0F Reason
code: E3 Error code: 6A13 BF42, cmd=3, pos=HCIOE022)
Common displays among panels 17