HP XP P9000 for Business Continuity Manager Software Reference Guide

Confirm Execution Recover Panel
If c is specified in AC in the Manage Copy Groups panel, the Confirm Execution Recover panel
is displayed, prompting you to confirm whether the copy pair is dissolved.
The following figure shows the Confirm Execution Recover panel.
Confirm Execution Recover
Command ===> ___________________________________________________________________________
Confirm that you want to execute the requested copy group operation.
Are you sure you want to dissolve the copy pairs from the secondary site?
Copy Group ID: TC0001
_ Yes, dissolve the copy pairs from the secondary site
_ Do not ask for confirmation again
Instructions:
Press ENTER key to dissolve the copy pairs from the secondary site.
Press CANCEL to cancel this operation.
F1=Help F12=Cancel
“Contents of the Confirm Execution Recover Panel” (page 167) describes the item in the Confirm
Execution Recover panel:
Table 89 Contents of the Confirm Execution Recover Panel
DescriptionItem
If you want to dissolve the copy pairs, specify /.Yes, dissolve the copy pairs from
the secondary site
If you do not want to display the Confirm Execution Recover panel whenever d
is specified after dissolving the copy pairs, specify /.
Do not ask for confirmation again
This setting remains in effect until you return to the Main Menu panel.
Specifying / for Yes, dissolve the copy pairs from the secondary site and then pressing the Enter
key dissolves the copy pair. Pressing the F12=Cancel key cancels the dissolving of the copy pair.
Confirm Command Device Build Panel
If b is specified in AC in the Route Status panel, the Confirm Command Device Build panel is
displayed asking you whether you want to register the command device in the storage system.
Figure 90 (page 168) shows the Confirm Command Device Build panel.
Confirmation Panels 167