HP XP P9000 for Business Continuity Manager Software Reference Guide

Table 86 Contents of the Logical Path Status of Copy Group Pair Panel (continued)
DescriptionItem
Primary SSIDSSID
Secondary storage system serial numberS/NSecondary
Secondary path group ID (path group ID in the reverse direction)PathID
When the path type is CU, nothing is displayed.
Secondary control unit numberCU
Secondary SSIDSSID
Primary port numberPrimary
Path directionDir
Secondary port numberSecondary
Status of each physical pathStatus
• ESTABLISHED: The physical path has been established.
• INIT FAILED: Initialization failed.
• NO RESOURCES AT PRI: The port for the primary storage system
is invalid.
• NO RESOURCES AT SEC: The port for the secondary storage
system is invalid.
• SERIAL# MISMATCH: The storage system serial numbers do not
match.
• CONFIG ERROR: The interface ID is invalid.
EXCTG Information panel
If a copy group container is defined with an EXCTG ID and you press the F18=Exctg key in the
Copy Group Status Summary panel, the EXCTG Information panel is displayed with information
about the EXCTG.
The EXCTG Information panel is shown in the following figure.
EXCTG Information
Command ===>
2012/02/29 15:55:09
Copy Group ID . . . . . . . . . . : UR4X4
Description . . . . . . . . . . . : CAJ 4X4 CONFIGURATION
EXCTG Consistency Time (GMT) . . . : 20120229 06:55:07.123456
EXCTG Consistency Time (LOCAL) . . : 20120229 15:55:07.123456
EXCTG CTDelta . . . . . . . . . . : 000 00:00:02
F1=Help F3=Exit F4=Refresh
The following items are displayed in the EXCTG Information panel.
Table 87 Contents of the EXCTG Information panel
DescriptionItem
Copy group IDCopy Group ID
Copy group descriptionDescription
Manage Copy Groups Panel (Copy Group Operation) 165