HP XP P9000 for Business Continuity Manager Software Reference Guide

ISPF settings
Setting the position of the command line
You can specify whether to position the command line at the top or at the bottom of each panel.
To set the position of the command line:
1. Start Business Continuity Manager. Type SETTINGS on the command line, and then press
the Enter key.
The ISPF Settings panel appears.
2. To display the command line at the top of panels, clear the Command line at bottom check
box. To display the command line at the bottom of panels, select the Command line at bottom
check box.
Setting the number of PF keys that are displayed
You can set the number of PF keys that are displayed. This setting is saved in the profile even after
Business Continuity Manager is stopped
To set the number of PF keys that are displayed:
1. Start Business Continuity Manager. Type PFSHOW TAILOR on the command line, and then
press the Enter key.
The ISPF Settings panel appears.
2. Set a value in Number of keys.
NOTE: If the specified value is between F1 and F12, the F17=DispConf and F18=Exctg keys
do not appear.
Common displays among panels
This section describes the common displays among panels.
Panel Help information
Help information for each panel is displayed when the cursor is positioned on each panel field
and F1=Help is pressed.
The following figure shows an example of the Help panel.
Manage Copy Groups
This panel allows you to perform management operations on existing Copy
Groups. It includes all of the Copy Groups which have been defined using
the PREFIX value that you have supplied in the Set Defaults panel.
To perform one of the supported management actions, type the action name
into the 'AC' field of the line showing the Copy Group that you wish to
act on.
The F6=Sort Key requests a pop-up window which can be used to sort the
copy groups table in several ways.
Press F10=PrevInfo to display previous information.
Press F11=NextInfo to display next information.
Press F17=DispConf to view the values set in Set Defaults panel from
Setting Information pop-up.
F1=Help F2=Split F3=Exit F4=Resize F5=Exhelp
F6=Keyshelp F7=PrvTopic F8=NxtTopic F9=Swap F10=PrvPage
Common displays among panels 15