HP XP P9000 for Business Continuity Manager Software Reference Guide

Figure 66 Logical Path Status Panel
Table 66 (page 109) describes the items in the Logical Path Status panel.
Table 66 Contents of the Logical Path Status Panel
DescriptionItem
Path set IDPath Set ID
A description of the path setDescription
Type of pathType
• CU: Inter-CU logical path
• DKC: Inter-DKC logical path
Primary storage system serial numberS/NPrimary
Primary path group ID (path group ID in the forward direction)PathID
When the path type is CU, nothing is displayed.
Primary CU numberCU
Displays the number of the CU in which a device exists to which the path
operation command is issued.
Primary SSIDSSID
Secondary storage system serial numberS/NSecondary
Secondary path group ID (path group ID in the reverse direction)PathID
When the path type is CU, nothing is displayed.
Secondary CU numberCU
Displays the number of the CU in which a device exists to which the path
operation command is issued.
Secondary SSIDSSID
Displays the number of physical paths defined for the storage system, if the
number of physical paths detected by the storage system is greater than the
number of paths defined in the path set definition file.
Information
Primary port numberPrimary
Direction of the pathDir
Manage Path Set Panel (Logical Path Management) 109