HP XP P9000 for Business Continuity Manager Software Reference Guide

Figure 65 Path Set Status Panel
Table 65 (page 107) describes the items in the Path Set Status panel.
Table 65 Contents of the Path Set Status Panel
DescriptionItem
Path set IDPath Set ID
A description of the path setDescription
Specify an action.AC
• s: Displays the Logical Path Status panel used to display status details
for the logical path.
• b: Executes the YKBLDPTH command, and establishes the selected
logical path. The execution result is displayed on the same panel.
• d: Executes the YKDELPTH command, and deletes the selected logical
path. The Confirm Path Delete panel is displayed.
• q: Executes the YKQRYPTH command, and updates the status of the
selected logical path. The execution result is displayed on the same
panel.
When actions are entered in multiple AC columns, each is processed in
the order displayed.
Type of pathType
• CU: Inter-CU logical path
• DKC: Inter-DKC logical path
Primary storage system serial numberSNPrimary
Path ID of the primary siteID
When the path type is CU, nothing is displayed.
Primary CU numberCU
Displays the number of the CU in which a device exists to which the path
operation command is issued.
If the path type is DKC, the control unit number is displayed either when
the control unit number is specified during the definition of a path or when
the Business Continuity Manager host is connected via a direct channel
to the target storage system.
Primary SSIDSSID
Manage Path Set Panel (Logical Path Management) 107