HP XP P9000 for Business Continuity Manager Software Reference Guide

Figure 62 Manage Path Set Panel
Pressing the F11=NextInfo key displays Description. Pressing the F10=PrevInfo key returns to the
previous display.
Figure 63 (page 104) shows the Manage Path Set panel displayed when the F11=NextInfo key is
pressed.
Figure 63 Manage Path Set Description Panel
Table 63 (page 104) describes the items in the Manage Path Set panel.
Table 63 Contents of the Manage Path Set Panel
DescriptionItem
Specify an action.AC
• l: Executes the YKLOAD command and loads a path set.
• b: Executes the YKBLDPTH command, and establishes all logical paths in the selected
path set.
• d: Executes the YKBLDPTH command, and deletes all logical paths in the selected
path set.
• q: Executes the YKQRYPTH command, and displays the status of all logical paths in
the selected path set. The Path Set Status panel will be displayed.
• c: Executes the YKQRYPTH command with the RESTRUCT parameter specified.
When actions are entered in multiple AC columns, the actions are carried out in the order
displayed.
Path set IDPath Set ID
Execution result of the action specified for ACStatus
• NOT LOADED: the path set has not been loaded.
• LOAD ERROR RC=xx
1
: An error occurred during loading the path set.
• LOADED WITH WARNINGS RC=xx: The path set has not been loaded, but with
warnings.
104 ISPF panels