HP XP P9000 for Business Continuity Manager Software Messages

Table 17 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKQ0x) (continued)
Explanation and recommended actionsMessage textMessage ID
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
Check that the S-VOL status is SIMPLEX.TCA or BC Z Primary is simplex,
secondary not. DEVN
device#(SN,CU#,CCA#)
YKQ021E MSG
SC=12 RC=20
(pair-index)
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
The volume serial number of the P-VOL cannot be obtained
because the P-VOL is offline.
Primary volume is offline. DEVN
device#(SN,CU#,CCA#)
YKQ026W MSG SC=8
RC=8 (pair-index)
Check that the copy group indicates the correct volumes
and is not being used for other purposes, make the P-VOL
online, and then re-execute the YKQUERY command.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
List of messages 85