HP XP P9000 for Business Continuity Manager Software Messages

Table 17 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKQ0x) (continued)
Explanation and recommended actionsMessage textMessage ID
For details about the return code, see IKJCT441 in the
TSO/E Programming Services.
nnnn
Error code for REXX access
In an BC Z copy group, the volume in the target copy pair
has already been paired with three volumes other than the
pairing volume specified in the copy group definition.
BC Z PAIR deficiency. DEVN
device#(SN,CU#,CCA#)
YKQ018E MSG
SC=16 RC=16
(pair-index)
Review the applicable copy pair definition in the copy group
definition.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
CCA#
Command control address number
If the device cannot be identified, ** is
displayed.
pair-index
See the pair index description in the
explanation of the YKE003E message.
Although the P-VOL is online, the current volume serial
number does not match the volume serial number defined
for the copy group. Processing will continue.
Primary volume serial changed.
DEVN device#(SN,CU#,CCA#)
YKQ019W MSG
SC=12 RC=0
(pair-index)
Check that the copy group indicates the correct volumes
and is not being used for other purposes.
device#
Device number
If the device cannot be identified, ****
is displayed.
SN
Storage system serial number
If the device cannot be identified,
************ is displayed.
CU#
Control unit number
If the device cannot be identified, ** is
displayed.
84 Messages