HP XP P9000 for Business Continuity Manager Software Messages

Table 13 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKM7x) (continued)
Explanation and recommended actionsMessage textMessage ID
Enter a value that is unique within the storage system.Enter unique value in a storage
system.
YKM770E ISPF
The panel cannot be scrolled because the start of the data is
already being displayed.
Panel could not scroll because
it shows beginning of data.
YKM771I ISPF
The panel cannot be scrolled because the end of the data is
already being displayed.
Panel could not scroll because
it shows end of data.
YKM772I ISPF
The dataset name of the disk configuration file exceeded the
44-character limit. Shorten the device address domain ID.
DADID must be shortened so
that dataset name of disk
YKM773E ISPF
configuration file is no more
than 44 characters.
The specified storage system is already defined in the route.
Select a different storage system
Specified storage system is
defined in the same route.
YKM774E ISPF
.
The storage system cannot be added because the number of
storage systems defined in the route is already at the maximum.
Panel could not proceed the
insert action because number
YKM775E ISPF
of the route entry has reached
maximum.
The route label must be a combination of one or more qualifiers.
Each qualifier must be from 1 to 8 alphanumeric characters
Route Label must be a
combination of one or more
YKM776E ISPF
(0-9, A-Z, a-z), and must start with an alphabetic character (A-Z,
a-z). The length of the route label must be from 1 to 8 characters.
qualifiers. Each qualifier must
be 1-8 alphanumeric
characters (0-9, A-Z, a-z) with
the first character being an
alphabetic character (AZ, a-z).
The length of Route Label must
be 1-8.
Table 14 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKM9x)
Explanation and recommended actionsMessage textMessage ID
Start the YKSTART command.Start YKSTART command
.
YKM900E ISPF
The ISPF service is not available.ISPF service is not available.YKM901E TSO
Execute the YKSTART command in an ISPF environment.
After that, you can execute whichever Business Continuity
Manager commands you need to.
The Business Continuity Manager load module was not found.
The Business Continuity Manager dataset might not be
concatenated to the LNKLST.
Load module is not found.YKM902E TSO
Revise the settings for the LNKLST, and then execute the
YKSTART command.
After that, you can execute whichever Business Continuity
Manager commands you need to.
The SELECT service terminated abnormally with the return code
nn.
SELECT service terminated
abnormally. RC=nn
YKM903E TSO
If this message is displayed immediately after executing the
YKSTART command, the Business Continuity Manager dataset
might not be concatenated to the panel library (dd name:
ISPPLIB), the table library (dd name: ISPTLIB), or the REXX exec
library (dd name: SYSEXEC).
80 Messages