HP XP P9000 for Business Continuity Manager Software Messages

Table 8 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKG2x) (continued)
Explanation and recommended actionsMessage textMessage ID
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
A copy pair capacity check could not be performed because the
capacity of a volume could not be acquired. A capacity check
cannot be performed in either of the following cases:
A copy pair capacity check
could not be performed
because the capacity of a
volume could not be
acquired.
YKJ214W TSO
RC=8
• When a volume capacity has not been acquired during a Local
Scan, Remote Scan, or NG Scan.
• When a volume is in any of the storage systems below and a
Remote Scan or NG Scan has been performed on the volume.
In this case, the capacity of the volume cannot be acquired.
◦ XP1024/XP128 Disk Array
◦ XP12000 Disk Array
◦ XP24000 Disk Array
A copy group definition file was created, but the settings might
contain incorrect information.
The capacities of the copy pair volumes are different. A copy pair
whose P-VOL and S-VOL capacities are different cannot be defined.
The capacities of the copy
pair volumes are different:
dd-name: rec#
YKJ215E TSO
RC=32
To create a copy pair whose P-VOL and S-VOL capacities are
different for migration, specify NOCHECK for the CAPACITY
parameter, and execute the YKIMPORT command. For details, see
the HP XP P9000 for Business Continuity Manager Software
Reference Guide.
dd-name
The dd name of the CSV file where the error was
detected.
rec#
Number of the line in the file indicated by
dd-name where the error was detected.
No value is assigned to the item identified by name in the EXCTG
information CSV file.
name is not specified in
EXCTG information CSV file:
dd-name: rec#
YKJ250E TSO
RC=32
name
Name of the item in the EXCTG information CSV
file
dd-name
DD name of the CSV file where the error was
detected
rec#
Number of the line in the file identified by
dd-name where the error was detected
The format of the value assigned to name in the EXCTG information
CSV file is invalid.
The value value of name in
EXCTG information CSV file
is invalid: dd-name: rec#
YKJ251E TSO
RC=32
value
Value assigned to the item identified by name
List of messages 55