HP XP P9000 for Business Continuity Manager Software Messages

Table 8 Business Continuity Manager error messages and corresponding troubleshooting actions
(message ID YKG2x) (continued)
Explanation and recommended actionsMessage textMessage ID
The copy group definition file specified by the BASEGROUP
parameter does not include the element identified by name.
name is not specified in
Copy Group definition
specified by BASEGROUP.
YKJ102E TSO
RC=32
Set the necessary elements in the copy group definition file that is
to be used as the base, and then retry.
name
Name of an element in the copy group definition
file
Processing ended due to the EXECIO TSO/E REXX command
failure (return code = n). For details, see the TSO/E REXX User's
Guide.
Error reported during file
input/output. EXECIO RC=
n: dd-name
YKJ150E TSO
RC=40
The probable causes are as follows:
• No CSV file is assigned to the DD name required for the
command.
• The dataset format of the CSV file is not supported.
dd-name
DD name of the CSV file where the error was
detected
The dataset format of the CSV file identified by dd-name is invalid.File format is invalid:
DSORG= XX. DSORG must
be PS: dd-name
YKJ151E TSO
RC=40
Delete the current CSV file and create a CSV file that is in the correct
dataset format.
For details about the CSV file dataset format, see the HP XP P9000
for Business Continuity Manager Software Reference Guide.
XX
DSORG of the CSV file where the error was
detected
dd-name
DD name of the CSV file where the error was
detected
The CSV file operation will stop because an error occurred when
using the CSV file.
Failed to operate csv file:
dd-name: dsstate
YKJ152E TSO
RC=40
See the information output in the message to review the
environment, and then update the CSV file again. For details about
troubleshooting, see the accompanying message and the HP XP
P9000 for Business Continuity Manager Software User Guide.
dd-name
DD name of the CSV file where the error was
detected
dsstate
CSV file status
• EXTENT= extent
The number of extents of the dataset that is
currently allocated
extent indicates the number of extents that are
allocated to the dataset indicated by dd-name.
• CANNOT GET DSSTATE, reason code= nnnn
The dataset information cannot be obtained, or
the CSV file is not allocated. nnnn (decimal (base
List of messages 51