HP XP P9000 for Business Continuity Manager Software Messages

Table 66 Details of error codes EBxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA CAJ copy pair status cannot
be changed because the
EB94
status of the specified copy
pair does not allow the status
transition.
Not outputOutputNot outputA CAJ copy pair status cannot
be changed because the
EBA0
specified S-VOL is not
installed.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the THPz
EBA7
volume specified for the
S-VOL satisfies one of
thefollowing conditions:
• The capacity is being
expanded.
• The pages are being
released.
• The pool of the
corresponding THPz is
being initialized.
Not outputOutputNot outputThe command could not be
executed because the remote
EBA8
command has been issued to
a volume that is not installed.
Not outputOutputNot outputThe remote command cannot
be executed because the
EBB3
command device has not
been defined.
Not outputOutputNot outputThe command could not be
executed because the
EBBD
command device is under
LDEV guard.
Not outputOutputNot outputA delta resync pair cannot be
made because the S-VOL of
EBC6
the specified copy pair is
used by another program
product (BC/FlashCopy).
Not outputOutputNot outputA CAJ copy pair cannot be
resynchronized (with the
EBCE
DELTAJNL parameter)
because the specified S-VOL
has old differential
information. Execute the CAJ
copy pair resynchronization
(with the ALLJNL parameter).
OutputNot
output
OutputNot outputThe remote command cannot
be executed because the path
EBD0
between the specified storage
system or CU (SSID) and the
command target storage
system is not set, or because
an error has occurred on the
path.
Details of error codes 251