HP XP P9000 for Business Continuity Manager Software Messages

Table 64 Details of error codes DBxx – E8xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
be used in 3DC (CAJxCAJ)
configurations.
• The specified R-JNL group
is already in use.
• Another mirror ID is already
defined for the specified
journal group.
Not outputOutputNot outputA CAJ copy pair cannot be
resynchronized because the
E898
specified R-JNL group is in use
as an R-JNL group for a CAJ
copy pair with another mirror
ID.
Not outputOutputNot outputA CAJ copy pair cannot be
made because an inter-DKC
E89A
logical path has not been
established in the forward or
reverse direction. Make sure
that inter-DKC logical paths
have already been established
in both directions.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the status from
E89B
the previous connection with
another storage system remains
in the specified M-JNL or R-JNL
group.
Specify a different journal
group, or delete the specified
journal group and then register
it again.
Not outputOutputNot outputA CAJ copy pair cannot be
made for one of the following
reasons:
E8A2
• The serial number of the
storage system specified for
the S-VOL is incorrect.
• Another path group ID is
already assigned for the
specified journal group.
Not outputOutputNot outputA resynchronization that
reverses the copy direction for
E8A6
CAJ copy pairs cannot be
performed because the journal
group of the specified volume
is not registered in the storage
system.
Not outputOutputNot outputA resynchronization that
reverses the copy direction for
E8A7
CAJ copy pairs cannot be
performed because a journal
volume is not registered in the
storage system for the journal
group of the specified volume.
Details of error codes 239