HP XP P9000 for Business Continuity Manager Software Messages

Table 62 Details of error codes C3xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputThe CAA program product has
not been installed on the RCU.
C3CB
Not outputOutputNot
output
The S-VOL of a CA or CAA copy
pair is a BC pair volume.
C3CD
Not outputOutputNot outputAnother C/T group ID is already
registered or made in the RCU.
C3D1
Not outputOutputNot
output
The storage system type of the
RCU is not supported by CA or
CAA.
C3D2
Not outputOutputNot
output
The specified SSID, or CU
number of the RCU is incorrect.
C3D3
Not outputOutputNot
output
The specified S-VOL cannot be
used because the device cannot
C3D6
be recognized from the
connection port.
Not outputOutputNot
output
The status of the S-VOL in the
RCU is incorrect.
C3D7
Not outputOutputNot
output
A CA/CAA copy pair cannot be
made because the volume
C3D8
specified to be the S-VOL is a
system residence volume.
Not outputOutputNot
output
A copy pair cannot be created
because the THPz volume
C3D9
specified for the S-VOL satisifes
one of the following conditions:
• The THPz volume is being
used by another program.
• The capacity is being
changed.
• The pages are being
released.
• The pool is being initialized.
Not outputOutputNot
output
A CA/CAA copy pair cannot be
made because the volume
C3DA
specified to be the S-VOL is a
system residence volume.
Not outputOutputNot
output
The S-VOL is not in the suspend
status.
C3DB
Not outputOutputNot outputA copy pair cannot be made
because CAA and CA cannot
be specified simultaneously.
C3FE
OutputNot OutputOutputNot
output
Commands that use CA copy
pairs, CAJ copy pairs, or the
C225
Remote DKC Control Function
cannot be executed because the
number of executable paths is
less than the minimum value.
Not outputOutputNot outputThe command for registering
command devices via the
C3D1
Remote DKC Control Function
232 Storage system sense byte information