HP XP P9000 for Business Continuity Manager Software Messages

Table 62 Details of error codes C3xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Resync status, and the S-VOL for
FlashCopy cannot be specified.
Not outputOutputNot
output
The S-VOL of a BC copy pair or
a Reserve volume cannot be
C3BF
specified as the S-VOL of a CA
or CAA copy pair. Also, a
P-VOL in the Reverse Resync
status and the S-VOL for
FlashCopy cannot be specified.
Not outputOutputNot
output
When the P-VOL of a CA or
CAA copy pair is also the S-VOL
C3C0
of a BC copy pair, both S-VOLs
must be a copy pair in a
one-to-one combination.
Not outputOutputNot outputThe S-VOL is not made under the
C/T group.
C3C1
Not outputOutputNot outputThe C/T group ID specified in
making a copy pair is already
in use in the S-VOL.
C3C2
Not outputOutputNot outputThe 4MCU is already registered
or made under the subjected
C/T group.
C3C3
Not outputOutputNot outputThe option information (timer
type, timeout) for an operating
C3C4
(already being made a copy
pair) C/T group cannot be
changed.
Not outputOutputNot outputA copy pair could not be made
because there are multiple
C3C5
storage systems at the primary
site, but the timer type is not
System.
Not outputOutputNot outputThe command cannot be
executed because the update
C3C6
timeout option is different for
copy pairs that already exist and
those that have not yet been
made on the primary site that
has multiple storage systems.
Not outputOutputNot outputA CA or CAA copy pair cannot
be made. The reason might be
one of the following:
C3C7
• The specified volume is part
of a CA, CAA, or CAJ copy
pair with another volume.
• The specified volume is a
journal volume.
Not outputOutputNot outputThe C/T group is not registered
in the RCU.
C3C9
Not outputOutputNot
output
The S-VOL is in the reserve status
or the RCU, the S-VOL or the M-R
path is in the BUSY status.
C3CA
Details of error codes 231