HP XP P9000 for Business Continuity Manager Software Messages

Table 62 Details of error codes C3xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
exceeded. Check the license
capacity of this and all related
program products.
Not outputOutputNot
output
The specified volume within the
RCU, or another volume which
C30D
belongs to the same group is in
transition to a SIMPLEX or
suspend status. Try the operation
again in a few minutes.
Not outputOutputNot
output
The MCU is not NVS ON.C310
Not outputOutputNot
output
The subsystem level cache of the
MCU is not valid.
C311
Not outputOutputNot
output
The P-VOL is not in the SIMPLEX
status.
C312
Not outputOutputNot
output
The P-VOL is not in the suspend
status.
C313
Not outputOutputNot
output
The P-VOL is not in the SIMPLEX
status.
C314
Not outputOutputNot
output
The P-VOL has PIN data.C315
Not outputOutputNot
output
The drive copy is being
performed on the P-VOL
(troubleshooting).
C316
Not outputOutputNot
output
The drive copy is being
performed on the P-VOL (SVP
request).
C317
Not outputOutputNot
output
The copy task ending process is
being performed on the P-VOL.
C318
Not outputOutputNot
output
The collection copy is being
performed on the P-VOL.
C319
Not outputOutputNot
output
The P-VOL is in a collection
access status.
C31A
Not outputOutputNot
output
The logical volume of the P-VOL
is blocked (PDEV blocking
factor).
C31B
Not outputOutputNot
output
The P-VOL cannot be accessed
(because the LDEV is blocked or
in the NOT READY status).
C31C
Not outputOutputNot
output
Formatting of the logical volume
is being performed on the
P-VOL.
C31D
Not outputOutputNot
output
The P-VOL is in the READ ONLY
status.
C31E
Not outputOutputNot
output
The logical path between the
MCU and the RCU is not set
(number of path = 0).
C320
226 Storage system sense byte information