HP XP P9000 for Business Continuity Manager Software Messages

Table 60 Details of error codes C1xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
• A cable is not connected
properly.
• The specified port is invalid.
Not outputOutputNot outputAn attempt to establish or delete
all the specified multiple paths
C128
has failed. Possible reasons
include one or more of the
following:
• The specified parameter is
invalid.
• The port or MP status is
abnormal.
• A cable is not connected
properly.
• The specified port is invalid.
Not outputOutputNot outputThe command could not be
executed because the number of
C129
SSIDs registered in the RCU
exceeds four.
Not outputOutputNot outputThe command could not be
executed because the
C12A
device-identifying code of an
RCU for which path deletion is
specified is invalid, or because
the RCU type (FIBRE/ESCON) is
invalid.
Not outputOutputNot outputThe command could not be
executed because there are one
C12B
or more paths that have a
different serial number.
Not outputOutputNot outputThe command could not be
executed because automatic port
C12C
switching cannot be performed
for the specified path.
Not outputOutputNot outputThe command could not be
executed because the
C12D
device-identifying code of an
RCU for which path registration
is specified is invalid, or
because the RCU type
(FIBRE/ESCON) is invalid.
Not outputOutputNot outputThe command could not be
executed because all CU
C12E
numbers of an RCU for which
path creation or deletion is
specified are not the same.
222 Storage system sense byte information