HP XP P9000 for Business Continuity Manager Software Messages

Table 58 Details of error codes 8Fxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA CAJ copy pair cannot be
made because the configuration
8F53
does not allow the status
transition. (For example, the
specified volume has already
been made as a BC copy pair
and cannot be used for this
combination.)
Not outputOutputNot outputA CAJ copy pair cannot be
made or resynchronized. The
8F58
reason might be one of the
following:
• The pair statuses of the
specified S-VOL and P-VOL
do not match.
• The statuses of the R-JNL
group and M-JNL group do
not match.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the specified
8F67
S-VOL does not support external
volumes.
Not outputOutputNot outputA CAJ copy pair cannot be
made because the specified
volume is a command device.
8F6D
Table 59 Details of error codes C0xx
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputThe specified serial number or
SSID of the primary storage
C023
system is different from the
storage system serial number or
SSID of the local CU.
Not outputOutputNot outputA path cannot be set because
the specified CU number for the
C026
secondary site is not supported
for the primary or secondary
storage system.
Not outputOutputNot outputThe specified P-VOL does not
match the startup volume.
C02B
Not outputOutputNot outputThe specified serial number or
SSID of the primary storage
C02C
system is different from the
storage system serial number or
SSID of the local CU.
Not outputOutputNot
output
The copy type for making a CA
or CAA copy pair is incorrect.
C032
(You can specify NOCOPY, Full
Copy, or Resync only.)
Not outputOutputNot outputThe command cannot be
executed because the specified
C048
218 Storage system sense byte information