HP XP P9000 for Business Continuity Manager Software Messages

Table 57 Details of error codes 8Dxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
command as a command
device.
• The corresponding volume is
part of a CA or CAA copy
pair.
Not outputOutputNot outputThe command device cannot be
deleted. The reason might be one
of the following:
8D46
• The corresponding volume is
executing a remote control
command as a command
device.
• The corresponding volume is
part of a CA or CAA copy
pair.
Not outputOutputNot outputThe command could not be
executed because the specified
volume is a BC volume.
8D47
Not outputOutputNot outputThe command could not be
executed because the specified
volume does not exist.
8D4D
Not outputOutputNot outputA command device cannot be
defined because it differs from the
APID that was already registered.
8D4E
Not outputOutputNot outputThe command could not be
executed because the specified
volume is online.
8D4F
OutputNot outputThe host command parameter is
incorrect.
8D50
Not outputOutputNot outputThe command could not be
executed because the logical
8D51
volume of the specified volume is
blocked or the specified volume
is in the NOT READY status.
Not outputOutputNot outputThe command could not be
executed because the logical
8D52
volume of the specified volume is
blocked.
Not outputOutputA BC copy pair cannot be
dissolved. Possible reasons
8D56
include one or more of the
following:
• The status of the copy pair
does not allow the status
transition. For details, see error
code 2310.
• The copy pair is in the V-Split
status.
• The specified C/T group ID is
not registered.
212 Storage system sense byte information