HP XP P9000 for Business Continuity Manager Software Messages

Table 57 Details of error codes 8Dxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
include one or more of the
following:
• The specified volume is in the
SIMPLEX status.
• The P-VOL number in the
parameter and bootup volume
number do not match.
• The S-VOL number in the
parameter is incorrect.
• The serial number or SSID of
the primary storage system in
the parameter does not match
the storage system serial
number or SSID of the local
CU.
• The serial number or SSID of
the secondary storage system
in the parameter does not
match the storage system serial
number or SSID of the RCU.
• The S-VOL number in the
parameter and bootup volume
number do not match.
• The serial number or SSID of
the secondary storage system
in the parameter does not
match the storage system serial
number or SSID of the local
CU.
• SVOL(PERMIT)/Reverse
Resync is not supported.
• The specified volume is the
P-VOL.
• It is already in the suspend
status.
• The S-VOL is in the Pending
status.
• The status is invalid.
• The status of the copy pair is
being changed.
Not outputOutputA BC copy pair cannot be
suspended. Possible reasons
8D2A
include one or more of the
following:
• The status of the copy pair
does not allow the status
transition. For details, see error
code 2310.
• The copy pair is in the
SIMPLEX status.
• The copy pair is in the Split
status.
• The specified C/T group ID is
not registered.
210 Storage system sense byte information