HP XP P9000 for Business Continuity Manager Software Messages

Table 57 Details of error codes 8Dxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
specified by the host command
parameter is the S-VOL.
Not outputOutputNot
output
A status cannot be changed
because the status of the specified
8D1B
copy pair does not match the
actual status.
Not outputOutputNot
output
A CA or CAA copy pair cannot
be made or resynchronized.
8D1C
Possible reasons include one or
more of the following:
• The P-VOL is a command
device.
• The specified serial number of
the primary storage system or
SSID does not match the
storage system serial number
or SSID of the local CU.
• The specified P-VOL does not
match the bootup volume.
• The C/T group ID is incorrect.
• The P-VOL has not been made
in the corresponding C/T
group.
• The S-VOL is not in the Reverse
Resync status.
• Either C/T group ID or the C/T
group timer type is incorrect.
Not outputOutputA BC copy pair cannot be made
or resynchronized. Possible
8D1D
reasons include one or more of
the following:
• The S-VOL is online.
• The status of the copy pair
does not allow the status
transition. For details, see error
code 2310.
• The P-VOL is online.
• The charging limit of the
program product was
exceeded.
• The copy pair is in the Pending
status.
• The copy pair is not in the Split
status.
• The specified C/T group ID is
not registered.
• The number of copy pairs in
the specified C/T group ID
exceeds the maximum number.
OutputNot outputThe serial numbers for the primary
and the secondary storage
8D1E
208 Storage system sense byte information