HP XP P9000 for Business Continuity Manager Software Messages

Table 56 Details of error codes 7Fxx – 8Cxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
remote DKC control function is not
set.
Not outputOutputNot outputThe command could not be
executed because the path for the
8CEB
Remote DKC Control Function is
not set.
Not outputOutputNot outputThe command could not be
executed because in the
8CFB
instruction to transfer to a remote
storage system, there is an error
in the storage system serial
number.
Not outputOutputNot outputThe command could not be
executed because the command
device is not defined.
8CFC
Table 57 Details of error codes 8Dxx
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA path cannot be established
because there is an invalid
parameter.
8D00
• The storage system serial
number is incorrect.
• The SSID is incorrect.
• The CU number is not
supported.
Not outputOutputNot outputA path cannot be established
because there is an invalid
8D01
parameter. Alternatively, path
establishment is not supported.
Not outputOutputNot outputA path cannot be deleted because
there is an invalid parameter.
8D09
Alternatively, path deletion is not
supported.
Not outputOutputNot outputOutputA copy pair cannot be made. The
reason might be one of the
following:
8D10
• An inter-CU logical path has
not been set between the
specified CUs.
• The storage system serial
number of the P-VOL is
incorrect.
• The SSID of the P-VOL is
incorrect.
• The CU number is not
supported.
Not outputOutputNot outputThe command could not be
executed because the volume
8D11
206 Storage system sense byte information