HP XP P9000 for Business Continuity Manager Software Messages

Table 55 Details of error codes 50xx – 6Exx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputA suspension cannot be made.
The reason might be one of the
following:
69F7
• The specified parameter is
invalid.
• The storage system does not
support the Open/MF
Consistency Preservation
Function.
Not outputOutputA suspension cannot be made
because there is an invalid
parameter.
69F8
Not outputOutputA copy pair cannot be dissolved
because there is an invalid
parameter.
69F9
Not outputOutputA copy pair cannot be dissolved
because the volume that received
the command is a BC S-VOL.
69FB
Not outputOutputNot outputA CAA copy pair cannot be
resynchronized, suspended, or
69FC
dissolved because a volume other
than CAA has been specified.
Not outputOutputNot outputA CAA copy pair cannot be
dissolved with Consistent
69FE
specified because the specified
volume is not the S-VOL.
Not outputOutputA copy pair cannot be made
because the program product
69FF
necessary for the operation is not
installed.
Not outputOutputNot outputA C/T group ID cannot be
registered because there is an
invalid parameter.
6A00
Not outputOutputNot outputThe command could not be
executed because the
6A07
corresponding volume is not the
P-VOL of a CAA copy pair or it is
a Non Gen'ed volume.
Not outputOutputNot outputAn ATTIME suspend time for CAA
cannot be set because there is a
6A08
copy pair that is not in the
DUPLEX status.
Not outputOutputNot outputAn ATTIME suspend time for CAA
cannot be set because the
6A09
specified C/T group timer type is
not System.
Not outputOutputNot outputThe command could not be
executed because the CAA
program product is not installed.
6A0F
OutputNot outputThe command could not be
executed because a remote
6A13
Details of error codes 201