HP XP P9000 for Business Continuity Manager Software Messages

Table 55 Details of error codes 50xx – 6Exx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
OutputNot outputThe command cannot be
executed. The reason might be
one of the following:
69E7
• The command cannot be
executed because the specified
volume does not exist.
• The Protection attribute has
been set by Hitachi Volume
Retention Manager software.
OutputNot outputThe command cannot be executed
because the specified volume is
blocked.
69E8
Not outputOutputNot outputThe command cannot be
executed. The reason might be
one of the following:
69E9
• The corresponding volume is
in the SIMPLEX status.
• The corresponding volume is
not part of a CAA copy pair.
• The corresponding volume is
not a P-VOL.
Not outputOutputNot outputA path cannot be established
because there is an invalid
parameter.
69F2
• The storage system serial
number is incorrect.
• The SSID is incorrect.
• The CU number is not
supported.
Not outputOutputA copy pair cannot be created or
resynchronized. The reason might
be one of the following:
69F3
• The storage system serial
number of the P-VOL is
incorrect.
• The SSID of the P-VOL is
incorrect.
• The CU number is not
supported.
• The storage system does not
support the Open/MF
Consistency Preservation
Function.
Not outputOutputNot
output
A status cannot be changed
because the specified volume is
the S-VOL.
69F5
200 Storage system sense byte information