HP XP P9000 for Business Continuity Manager Software Messages

Table 55 Details of error codes 50xx – 6Exx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
that does not support the FREEZE
command is connected.
Not outputOutputNot outputThe command cannot be executed
because the host ID is invalid (not
within the valid range).
64FA
Not outputOutputNot outputThe command device cannot be
defined. Possible reasons include
one or more of the following:
64FB
• The corresponding volume
does not exist.
• The corresponding volume is
online.
• The corresponding volume is
a system residence volume.
• The emulation type of the
corresponding volume is
3390-V.
• The corresponding volume is
being used by another
program product such as BC,
CA, CAA, CAJ or Compatible
FlashCopy.
Not outputOutputNot outputA command device cannot be
redefined because the APID that
64FC
was already defined does not
match the APID you attempted to
define.
Not outputOutputNot outputThe command device cannot be
defined because a command
64FD
device with the same APID has
been defined for another device.
Not outputOutputNot outputA command device cannot be
defined because the APID
64FF
specified by the parameter does
not match the APID defined for
the command device.
OutputNot outputOutputNot outputA parameter error occurred. This
error might occur during a
69E4
storage system configuration
change or operation after the
microcode is changed. If this
occurs, scan the storage system
by using Business Continuity
Manager to obtain volume
information again.
Not outputOutputNot outputA path cannot be deleted because
there is an invalid parameter.
69E6
Details of error codes 199