HP XP P9000 for Business Continuity Manager Software Messages

Table 54 Details of error codes 4Bxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
is not registered in the storage
system.
Not outputOutputNot
output
No timestamp transfer mode CA
copy pair can be made because
4BB1
the specified volume is not a CA
copy pair.
Not outputOutputNot
output
A timestamp transfer mode CA
copy pair cannot be made
4BB2
because the specified volume is
an XRC pair.
Not outputOutputNot
output
A CA copy pair resynchronization
that makes it possible to use the
4BD1
Open/MF Consistency
Preservation Function cannot be
performed because the specified
C/T group ID is invalid.
Not outputOutputNot
output
A CA copy pair cannot be made
and resynchronized because the
4BD2
specified volume does not support
the Open/MF Consistency
Preservation Function.
Not outputOutputNot outputThe specified operation cannot
be performed because either the
4BDE
local storage system or the remote
storage system does not support
inter-CU logical paths.
Table 55 Details of error codes 50xx – 6Exx
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputThe command device cannot be
defined because the specified
501C
volume is a journal volume.
Alternatively, a CAJ copy pair
cannot be made.
Not outputOutputNot outputA command device cannot be
deleted because the APID differs
from the defined APID.
64E2
Not outputOutputNot outputThe remote DKC control function
cannot be executed because the
command device is not set.
64E3
Not outputOutputNot outputA command device cannot be
defined because the specified CU
number is not supported.
64E8
Not outputOutputNot outputThe paths between CUs, which
contain command devices, are
not set.
64EA
Not outputOutputNot
output
The FREEZE command cannot be
executed for CA copy groups with
64EE
C/T group IDs because a host
198 Storage system sense byte information