HP XP P9000 for Business Continuity Manager Software Messages

Table 54 Details of error codes 4Bxx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot
output
RUN (releasing FREEZE) cannot
be executed for a CA copy group
4B15
with a C/T group ID specified.
The reason might be one of the
following:
• The specified volume is not in
a CA copy group with a C/T
group ID specified.
• The specified volume is using
the Open/MF Consistency
Preservation Function.
• The copy pair is in the
SIMPLEX status.
Not outputOutputNot
output
A copy pair cannot be created or
resynchronized because the
4B32
specified P-VOL satisfies one of
the following conditions:
• The P-VOL is being used for
FlashCopy.
• The P-VOL is being used for
FlashCopy SE.
• The P-VOL is a TSE-VOL.
Not outputOutputNot outputA path cannot be set because the
CU number for the specified MCU
is not supported.
4B35
Not outputOutputNot outputA path cannot be set because the
port number for the specified
MCU is not supported.
4B36
Not outputOutputNot outputA path cannot be set because the
port number for the specified RCU
is not supported.
4B37
Not outputOutputNot outputA path cannot be set because the
CU number for the specified RCU
is not supported.
4B38
OutputNot
Output
OutputNot outputThe remote command cannot be
executed because the path
4B49
between the specified storage
system or CU (SSID) and the
command target storage system
is not set, or an error has
occurred on the path.
Not outputOutputNot
output
The CA copy pair that specified
a C/T group ID cannot be created
4B85
because the specified volume is
a FlashCopy pair.
Not outputOutputNot
output
A CA copy pair cannot be made
because the specified volume is
4B86
a FlashCopy pair and
differential-data management unit
is cylinder.
Not outputOutputNot outputA CAA copy pair cannot be
made because the specified CTID
4BA9
Details of error codes 197