HP XP P9000 for Business Continuity Manager Software Messages

Table 51 Details of error codes 46xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set. The reason might
be one of the following:
4660
• The specified parameter is
invalid.
• The storage system does not
support the CAJ ATTIME
suspend function in Quick
mode.
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set because shared
memory is not implemented.
4661
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set because the
4662
specified volume is not the S-VOL
of a CAJ copy pair.
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set due to either of the
following causes:
4663
• The CAJ copy pair is in the
SIMPLEX status.
• The copy pair is a delta resync
CAJ copy pair.
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set because the timer
4665
type of the specified R-JNL group
is not System.
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set because three
4668
generations of suspend time have
already been set for the specified
R-JNL group.
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set because another
4669
suspend time has already been
set for the C/T group of the
specified BC copy pair.
Not outputOutputNot outputThe CAJ ATTIME suspend time
cannot be set. The reason might
be one of the following:
466A
• The specified time is earlier
than the consistency time.
• The timer type remains Local
because the CAJ copy pair has
not been resynchronized after
the timer type was changed
from Local to System.
When changing the timer type
from Local to System, you need
to suspend the CAJ copy pair. If
the CAJ ATTIME suspend time has
already been set, perform the
190 Storage system sense byte information