HP XP P9000 for Business Continuity Manager Software Messages

Table 51 Details of error codes 46xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
OutputNot outputThe command could not be
executed because the remote DKC
Control Function is not supported.
4621
OutputNot outputThe command could not be
executed because the 3-site
function is not supported.
4630
Not outputOutputNot outputA CAJ copy pair status cannot be
changed because an attribute of
4633
the P-VOL or S-VOL differs from
the actual volume attribute. The
command might have failed
because the YKQUERY command
was not executed in advance.
Not outputOutputNot outputThe command device could not
be defined because the specified
4639
volume is a CAJ copy pair volume
or journal volume.
Not outputOutputNot outputDue to either of the following
reasons, CAJ ATTIME suspensions
463C
cannot be scheduled in Quick
mode:
• The storage system does not
support the CAJ ATTIME
suspend function in Quick
mode.
• The microcode of the storage
system is currently being
changed to one that supports
the CAJ ATTIME suspend
function in Quick mode.
Not outputOutputNot
output
A CA or CAA copy pair status
cannot be changed because a
4645
logical path has not been
established between the P-VOL
and S-VOL.
Not outputOutputNot outputCAA copy pair operations cannot
be performed because the
4649
specified storage system does not
support CAA.
Not outputOutputNot outputAn attempt to acquire the journal
group attribute failed.
464B
Not outputOutputNot outputAn attempt to acquire the journal
group attribute or the total CAJ
data length failed.
464E
Not outputOutputNot outputA delta resync cannot be
executed because volumes are
4650
specified within the operational
range.
Not outputOutputNot outputA delta resync cannot be
executed in the reversed copy
direction.
4651
Details of error codes 189