HP XP P9000 for Business Continuity Manager Software Messages

Table 51 Details of error codes 46xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputA CAJ copy pair cannot be made
because the specified M-JNL
group is not registered.
4613
Not outputOutputNot outputA CAJ copy pair cannot be made
because no logical path has been
4614
made between the specified
primary storage system and
secondary storage system.
Not outputOutputNot outputA CAJ copy pair status cannot be
changed because the I/O
4615
execution volume and the P-VOL
for the parameter do not match.
Not outputOutputNot outputA CAJ copy pair cannot be
suspended, resynchronized or
4616
dissolved because both the
specified serial number of the
primary storage system and serial
number of the secondary storage
system do not match the serial
number of the local storage
system.
Not outputOutputNot outputA CAJ copy pair cannot be
suspended, resynchronized or
4617
dissolved because the specified
volume is not a CAJ copy pair.
Not outputOutputNot outputA CAJ copy pair cannot be
suspended because it was a
4618
suspend request with Volume and
Purge specifications.
Not outputOutputNot
output
A CA, CAA, or CAJ copy pair
cannot be suspended with Reverse
4619
specified because the command
is issued to the P-VOL.
Not outputOutputNot
output
A CA, CAA, or CAJ copy pair
cannot be resynchronized with
461A
Reverse specified because the
command is issued to the P-VOL.
Not outputOutputNot outputThe command device cannot be
defined. The reason might be one
of the following:
461E
• The command device is
executing a remote control
command.
• The volume is part of a CA or
CAA copy pair.
Not outputOutputNot outputThe command device cannot be
deleted. The reason might be one
of the following:
461F
• The command device is
executing a remote control
command.
• The volume is part of a CA or
CAA copy pair.
188 Storage system sense byte information