HP XP P9000 for Business Continuity Manager Software Messages

Table 48 Details of error codes 23xx (continued)
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputThe command could not be
executed because the specified
ATTIME suspend time is in the past.
23F3
Not outputOutputThe command used to request that
the ATTIME suspend time
23F4
information be acquired could not
be executed due to the following
reasons:
• The command was issued to the
P-VOL.
• The status of the copy pair is
SIMPLEX.
Make sure that the command is
properly issued and the copy group
definition file has been correctly
configured.
Not outputOutputThe command could not be
executed because the ATTIME
23F5
suspend time is already set. To
change the configuration of the
copy group definition file, first
cancel ATTIME suspension.
Not outputOutputA BC copy pair status cannot be
changed because the specified BC
23FF
copy pair status does not allow the
status to be changed.
Table 49 Details of error codes 36xx
Type of errorError detailsError
code
OthersTHPzPATHCMDCAJCAACABC
Not outputOutputNot outputRegistration to EXCTG has failed
because the specified arbitration
3613
command device is not an
arbitration command device.
Not outputOutputNot outputRegistration to EXCTG has failed.
The reason might be one of the
following:
3614
• The specified arbitration
command device is not defined.
• The specified arbitration
command device is blocked.
Not outputOutputNot outputRegistration to EXCTG has failed
because the journal group to be
3616
registered is also subject to deletion
from EXCTG.
Not outputOutputNot outputRegistration to EXCTG has failed
because the status is currently
being changed.
3617
Not outputOutputNot outputRegistration to EXCTG has failed
because M-JNL groups and R-JNL
groups co-exist within the EXCTG.
3618
Details of error codes 181